While it is possible to install a switch yourself, it is generally recommended to hire

Yes, switches can be used in both residential and commercial applications.

1 way is an on/off switch and means there’s only one place you can turn your light on or off. This is the most common kind of switch found in most homes. Most 2 way switches can also be used as a 1 way on/off switch.
2 way means there’s another switch controlling the same light. You can turn your lights on or off from two places, for example both at the top and bottom of your stairs. 2 way light switches are also great for large rooms with two doorways where you want to control lights both coming in to, and out of, the room. Most of our switches are suitable for use as a two way.
Intermediate means you can turn your lights on or off from three places. For example in a bedroom you can turn the main light on or off from a switch at either side of the bed or, a switch by the door. These also work perfectly in large rooms with multiple entrances.

The right switch for your project will depend on factors such as the type of circuit and the number of light fixtures or appliances being controlled.

Switches should always be installed by a licensed electrician to ensure that the installation is done correctly and safely.

How to wire

Causes of Electrical Leaks

switch is a device that is used to turn a circuit on or off, controlling the flow of electricity.

1, 2 and 3 gang refers to the actual number of switches (dimmers, throws or rockers) on the plate. For example, a 2 gang dimmer will have two dimmer switches.

Answer: Though modern modular switches are designed keeping in mind safety issues, it is good practice not to use an electrical switch if it is:

Loosening up
Feeling hot
Looks burned
Emanates burning smell

Where to install Switches

There are specially designed weather-resistant wiring device sockets available for outdoor use. These sockets provide protection against environmental elements and are suitable for outdoor installations.)

The right socket for your project will depend on factors such as the type of circuit, location, and usage. For example, W/P sockets are recommended for wet areas likeout side bathrooms and kitchens etc.

To choose the right wiring device socket, consider factors such as the socket type, voltage rating, ampere rating, durability, aesthetics, and whether you need additional features like USB charging ports or switches.

It is recommended to periodically inspect and maintain your wiring device sockets to ensure safe operation. Regularly check for signs of damage, loose connections, or overheating. If any issues are found, contact a licensed electrician to address them promptly.

There are various types of wiring device sockets available, including standard sockets, switched sockets, USB sockets, industrial sockets, and specialized sockets for specific applications.

With the proliferation of devices occupying our homes, access to power sockets has become an increasingly frustrating issue. Many phones and tablets are now supplied with USB charging cables, with USB sockets you can plug straight into the wall with the benifit of improvd chaging times.

A socket, also known as a receptacle, is an electrical device that is used to connect electrical devices to a power source.

It is crucial to turn off the power supply to the circuit or use a circuit breaker lockout device before working on the socket. Ensure proper grounding, use insulated tools, and follow the manufacturer's instructions. If unsure, consult a licensed electrician.

One may also make use of a 5 Amp socket outlet for lighting. This is a non-standard socket with round pins purposely intended for a table or floor lamp.

The maximum power that can be drawn from a shaver socket is 20VA.

A Blank Plate is a cover plate that is used to cover unused electrical boxes or openings in walls or ceilings. It can also be used to mount electrical devices like switches or outlets.

Cat 6 and 5 Telephone cables are used for networking and telecommunications purposes. Cat 6 cables are designed to transmit data at higher speeds and are more expensive than Cat 5 cables.

A connection cable is a cable that is used to connect two devices together. It is commonly used to connect computers to other devices like printers, scanners, or external hard drives.

A dimmer is an accessory that allows you to control the brightness of a light fixture. It works by reducing the amount of electricity that is sent to the bulb, which in turn reduces its brightness.

A Do Not Disturb/Make Up Room Input Unit is a device that is used in hotels to allow guests to indicate whether they want their room to be cleaned or not. It is usually located near the door and has buttons or switches to indicate the guest's preference.

A Door Chime/Bell is a device that is used to signal when someone is at the door. It is commonly used in residential and commercial buildings.

A fuse unit is an electrical device that is designed to protect electrical circuits from overloading or short circuits. It works by breaking the circuit when the current becomes too high, preventing damage to the circuit.

A SAT Socket is a type of connector that is used for satellite television systems. It is used to connect the satellite

A Shaver Socket is a specialized electrical socket that is designed for use with electric shavers. It typically has a lower voltage output

A VGA Connector is a type of connector that is used to transmit video signals between devices like computers and monitors. It is commonly used in older devices and has been largely replaced by newer connectors like HDMI.

An Audio Socket is a type of connector that is used for transmitting audio signals. It can be used for devices like speakers, microphones, and headphones.

An F Connector is a type of coaxial cable connector that is used for connecting devices like televisions and cable modems to coaxial cable.

An outlet, also known as a power outlet or electrical outlet, is a device that is used to provide electrical power to devices like lamps, appliances, and electronic devices.

An RCA Connector is a type of plug that is used to transmit audio and video signals. It can be used for devices like DVD players, gaming consoles, and TVs.

A non-isolated coax socket is a standard socket. If you wish to install a socket to connect your TV coax lead into, this is what is required. Also, this version must be used for satellite installation as a two way signal is required. The satellite box does not only receive a signal, it also sends a signal back to the satellite dish. An isolated coax socket will block the return signal.

An isolated socket lets the signal through from the aerial/satellite dish but does not allow any kind of return signal/current. This type of socket would be used where a communal dish or aerial is installed, such as in an apartment block. The isolated socket blocks interference from receivers (televisions, digital boxes, satellite boxes) which spoils the signal which the rest of the users receive.